Engine Rebuild Parts

Back to my main Porsche Page
Back to my repairs Page

The parts listed for the block and cylinder head are common between the 924 & 931 except where noted.
If the part number is highlighted, clicking it will show a photo of the part in a separate, sizeable window.

Engine block ...

Bearing set, connecting rod 046.198.501.A
Bearing set, crankshaft 059.198.451
Piston rings, Deves (931 specific) 2141
Piston rings, Deves (924 specific) 1970 / 1970 B
Seal, front main 048.115.147
Seal, rear main 059.103.051.D
Gasket SET, oil pan 060.198.041
Water pump 060.121.010.X
Alternator belt (10x1050) 999.192.154.50
Cylinder head ...
Timing belt 056.109.119.A
Tensioning roller 056.109.243.F
Gasket SET, cylinder head (931 specific) 931.100.901.00
Gasket ONLY, cylinder head 931.104.337.03
Gasket SET, valve cover 060.198.025
Camshaft oil elbow 052.115.707
Seal, camshaft 068.103.085.E
Seal, valve stem (8 each) 046.109.675.A
Cam follower (as required) 046.109.311
Valve, exhaust (931 specific, as required) 931.105.406.02
Valve, intake (931 specific, as required) 931.105.401.02
Exhaust manifold studs (as required) 8 x 1.25 x 35?40?mm
Copper nuts for exhaust manifold (as required) 8 x 1.25mm
Exhaust gaskets etc, 931 specific...
Gasket, metal, flat, square, wastegate (2 ea) 930.123.194.06
Gasket, metal, ring, turbo to manifold & J-tube to manifold (2 ea) 993.111.195.00
Gasket, metal, ring, turbo-exhaust 944.111.205.02
Copper nuts (turbo-exhaust) 10 x 1.5mm
Copper nuts (exhaust-wastegate) 8 x 1.25mm
Some 931 models may use the following flat gaskets-
check your installation before purchase
Gasket, metal, flat, manifold-J-tube 931.111.191.10
Gasket, metal, flat, turbo-exhaust 931.111.192.04
Gasket, metal, flat, manifold-turbo, triangular 931.123.193.05
Clutch parts, 931 specific...
Bearing, clutch fork, needle (2 ea) 999.201.213.00
Shaft, clutch fork 951.116.133.00
Bearing, clutch throwout 931.116.082.04
Bearing, pilot 931.102.111.00
Clutch disk (86 Ford Bronco II works) 931.116.011.04
Fork, clutch release
Pressure plate, clutch 931.116.001.02
Other...
Motor mount, left 477.199.301.A
Motor mount, right 477.199.303

Engine block ...
Bearing set, connecting rod	046.198.501.A
Bearing set, crankshaft	059.198.451
Piston rings, Deves (931 specific)	2141
Piston rings, Deves (924 specific)	1970 / 1970 B
Seal, front main	048.115.147
Seal, rear main	059.103.051.D
Gasket SET, oil pan	060.198.041
Water pump	060.121.010.X
Alternator belt (10x1050)	999.192.154.50
Cylinder head ...
Timing belt	056.109.119.A
Tensioning roller	056.109.243.F
Gasket SET, cylinder head (931 specific)	931.100.901.00
Gasket ONLY, cylinder head	931.104.337.03
Gasket SET, valve cover	060.198.025
Camshaft oil elbow	052.115.707
Seal, camshaft	068.103.085.E
Seal, valve stem (8 each)	046.109.675.A
Cam follower (as required)	046.109.311
Valve, exhaust (931 specific, as required)	931.105.406.02
Valve, intake (931 specific, as required)	931.105.401.02
Exhaust manifold studs (as required)	8 x 1.25 x 35?40?mm
Copper nuts for exhaust manifold (as required)	8 x 1.25mm
Exhaust gaskets etc, 931 specific...
Gasket, metal, flat, square, wastegate (2 ea)	930.123.194.06
Gasket, metal, ring, turbo to manifold & J-tube to manifold (2 ea)	993.111.195.00
Gasket, metal, ring, turbo-exhaust	944.111.205.02
Copper nuts (turbo-exhaust)	10 x 1.5mm
Copper nuts (exhaust-wastegate)	8 x 1.25mm
Some 931 models may use the following flat gaskets- check your installation before purchase
Gasket, metal, flat, manifold-J-tube	931.111.191.10
Gasket, metal, flat, turbo-exhaust	931.111.192.04
Gasket, metal, flat, manifold-turbo, triangular	931.123.193.05
Clutch parts, 931 specific...
Bearing, clutch fork, needle (2 ea)	999.201.213.00
Shaft, clutch fork	951.116.133.00
Bearing, clutch throwout	931.116.082.04
Bearing, pilot	931.102.111.00
Clutch disk (86 Ford Bronco II works)	931.116.011.04
Fork, clutch release
Pressure plate, clutch	931.116.001.02
Other...
Motor mount, left	477.199.301.A
Motor mount, right	477.199.303

Back to my main Porsche Page
Back to my repairs Page